USB 3.0 to SATA IDE Adapter, Exhausting Drive Reader Exterior Extremely Restoration Converter Suitable with 2.5″ 3.5″ HDD, SSD,5.25-inch DVD/CD-ROM Optical Drive Information Switch with Energy Provide

$23.99

Added to wishlistRemoved from wishlist 0
Add to compare
Category:


Worth: $23.99
(as of Apr 17, 2025 22:40:04 UTC – Particulars)

From the model

EYOOLD – Bridging Reminiscences, Powering Futures

Each arduous drive holds a narrative. But, as tech evolves, tens of millions of drives change into “out of date”—deserted in drawers, labeled “lifeless.”

EYOOLD was born to bridge the hole between previous and new. Our adapters aren’t simply cables and chips—they’re keys to unlock legacies

Your drive isn’t “previous.”

QUICKLY ACCESS TO SATA IDE SSD&HDD: Exhausting drive adapter helps SATA/IDE 2.5″/3.5″ SSD/HDD, 5.25 exterior CD DVD optical drive; This Adapter permits us to retrieve the information and transfer it to a functioning arduous drive. with dual-head IDE Connector (40pin and 44pin) plus one SATA II Connector
SUPERSPEED UP TO 5Gbps with USAP: IDE arduous drive reader helps an information switch charge of as much as 5 Gbps and helps UASP. which is 70% Sooner than conventional USB 3.0 and 40% discount in required processor assets, Backward suitable with USB 2.0 / 1.1
HUGE 6TB CAPACITY SUPPORT: Designed to be light-weight and compact. arduous drive restoration converter helps a tough drive capability of As much as 6TB capability, Suggestions: Some IDE arduous drive is previous, So as so that you can use a “single” 3.5″ IDE arduous drive, you will have to set the jumper to “slave” earlier than activate the disk
ADDITIONAL FUCTIONS & EASY TO USE: USB 3.0 to IDE SATA adapter included 12V2A AC energy provide, for powering up the 5V/12V IDE gadgets utilization, ensures SATA HDD may be related properly. The 4-pin energy cable is designed for a 3.5’’ IDE drive; the LED gentle exhibits energy and exercise standing
SIMPLE RECOGNIZED: With plug-and-play performance, arduous drive to usb adapter eliminates the necessity for added drivers or advanced setup procedures, Heat Tip: Home windows can solely acknowledge (and assign a drive letter to) drives which are formatted in a suitable means. If this can be a new drive, you want to format
COVERTER WITH BROAD COMPATIBILITY: You should utilize IDE drives, normal SATA drives, The USB to IDE SATA adapter suitable with Home windows 10/ 8.1/ 8/ 7/Vista/XP, Mac IOS, and LINUX; Plug and play; assist sizzling swap

Clients say

Clients discover the USB adapter works completely on all drives and is simple to make use of, taking solely a minute to arrange. They admire its worth for cash and think about it an important instrument for knowledge backup, with quick USB 3.0 normal switch speeds. The construct high quality receives combined suggestions, with some praising the sturdy plastic case whereas others report it does not final lengthy, and a number of other clients observe inadequate energy provide.

13 reviews for USB 3.0 to SATA IDE Adapter, Exhausting Drive Reader Exterior Extremely Restoration Converter Suitable with 2.5″ 3.5″ HDD, SSD,5.25-inch DVD/CD-ROM Optical Drive Information Switch with Energy Provide

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Kurt

    Worked like a charm
    This seriously saved my bacon when motherboard shorted out and my other computer used a different drive system. Recovered 100% of data from fried computer! Very inexpensive solution too!

    Helpful(0) Unhelpful(0)You have already voted this
  2. joe

    adapter
    works well.

    Helpful(0) Unhelpful(0)You have already voted this
  3. Baron of Colier

    Don’t use a USB 3.0 port for 3.5 IDE HDD
    I am giving it 4 out 5 because there are no instructions (aside from the obvious how to plug it in picture).While it’s a pretty simple device and works well, I ran into trouble with the older IDE drives. I got this to go through many of my old hard drives between 1998 and 2014, in particular the 3.5 inch IDE ones, which are a touch trickier than the others because they require an additional power input (which is included). The 12V adapter has maybe a 3′ cable which means if you run off a surge protector on the floor or something, you might have trouble reaching the device if you’re trying to set it up flat on a desk. The extra power connector to the drive is a tight fit, but it works fine.Here’s the kicker though: every time I plugged it into a USB 3.0 slot and powered it up, the drive would be detected, then it would disable and freeze up my machine and I would have to hard reset. I tried this with multiple jumper settings and reboots and still had the same problem on an old 80 GB Seagate Barracuda 7200.7 from 2004. On a whim, I decided to slow down my USB 3 port by plugging in a USB 2.0 hub and plugging into that. Presto! The drive works perfectly good (well good enough to grab all the old photos and stuff off of at least). Anyway, I haven’t tried with a USB 2.0 port because they are all inaccessible on this machine, but at least if I slow a 3.0 down to 2.0, I get this thing to work perfectly. Hope this helps somebody.

    Helpful(0) Unhelpful(0)You have already voted this
  4. G. T.

    Small but Handy
    The unit was very compact as expected. I have not attempted to use it yet because I was able to accomplish what I needed to do in another way. I believe it will come in handy in the near future. It included the power supply and ide power connector. It is very light but should be easy to connect and use.

    Helpful(0) Unhelpful(0)You have already voted this
  5. ducatidave

    Works for almost any hard drive with a couple catches
    This adapter works great for almost every Hard drive. It is so handy I bought two. There are a couple things to remember after I used this on over 20 hard drives.You must turn the power on to the hard drive before plugging in the USB cable (about 15 to 20 sec). This gives the hard drive time to power up. With newer SATA hard drives and solid state drives this is not as important. It is essential with older IDE drives.There are adapters for connecting solid state drives to the USB port. This is not one of them. The power MUST be turned on to work.If the hard drive is really old (like from 1995 or older) this may not work. Not because the adapter is not working but because the hard drive cannot send its info to your computer.There are two other hard drives that this did not immediately work on. One was an early model SATA drive that needed a power plug like the older IDE drives take. The power cable on this device was too short to reach the plug. I was able to get a power cord extension which allowed me to power up the drive. The other drive was an ancient Maxtor 1.8 GB drive. The plug was recessed so far into the drive that the adapter would not engage to the drive. This is the only drive I have seen like this.

    Helpful(0) Unhelpful(0)You have already voted this
  6. M

    Works great for browsing, not for data transfer
    Product works great if you are curious what is on an old hard drive, but when attempting to transfer old files off of the hard drive, transfers time out after a minute or so, with the attached hard drive no longer being recognized. This occurred when transferring data with a variety of old hard drives. Besides that, set up is simple and it’s easy to use.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Mike

    easy to set up and use
    easy to set up and use

    Helpful(0) Unhelpful(0)You have already voted this
  8. Joshua D

    JUST WHAT I NEEDED THANK YOU
    I have a old harddrive that I was trying to get stuff off of for a while. I have over 1400 hours worth of music production projects on the harddrive that was starting to fail. After I plugged it in this thing made it feel like it was as brand new drive, I was able to go ahead and move out all the files from my old harddrive to my SSD and I couldn’t be happier with this product at all.If you do occasional IT work for friends or family like I do, this is a must have tool you need in your toolbox. Absolutely amazing product would recommend to anyone trying to get stuff off their old harddrive.

    Helpful(0) Unhelpful(0)You have already voted this
  9. mia

    service et le produit parfait

    Helpful(0) Unhelpful(0)You have already voted this
  10. Pramod

    Even the product is 3.0 but speed is not upto the markWorking as 2.0 and few 3.5″ HDD CONNECTIVITY Issues

    Helpful(0) Unhelpful(0)You have already voted this
  11. Amazon Customer

    funktioniert einwandfgrei

    Helpful(0) Unhelpful(0)You have already voted this
  12. Gerald Bakker

    Have an orphaned hard drive and wonder what’s on it?Get this adapter and plug any hard drive into your USB port on any other computer so that you can read and write to that old hard drive or even erase everything before you send it to the dump. I used it to recover old photos I had long forgotten. Then I erased the old hard drive contents and dropped it off at my local Electronics recycling station.

    Helpful(0) Unhelpful(0)You have already voted this
  13. pratyush sahu

    good…

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    USB 3.0 to SATA IDE Adapter, Exhausting Drive Reader Exterior Extremely Restoration Converter Suitable with 2.5″ 3.5″ HDD, SSD,5.25-inch DVD/CD-ROM Optical Drive Information Switch with Energy Provide
    USB 3.0 to SATA IDE Adapter, Exhausting Drive Reader Exterior Extremely Restoration Converter Suitable with 2.5″ 3.5″ HDD, SSD,5.25-inch DVD/CD-ROM Optical Drive Information Switch with Energy Provide

    $23.99

    Marvy Deals
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart